Speciality Grades
Speciality Grades
| Category | Product Grades |
Viscosity (mPa・s) |
Saponification Degree (mol % ) |
Comments | Applications |
|---|---|---|---|---|---|
| Reactive PVOH Viscosity |
GOHSEFIMER Z | ||||
| Z-100 | 4.5 ~ 6.0 |
98.5 or higher | Water-resistant adhesive Honeymoon adhesive Vinyl acetate- and acryl -emulsifying stabilizer Thermal recording paper |
||
| Z-200 | 11.5 ~ 14.0 |
99.0 or higher | |||
| Z-205 | 11.5 ~ 14.0 | 99.0 or higher | |||
| Z-210 | 11.5 ~ 15.0 | 95.0 ~ 97.0 | |||
| Z-220 | 11.5 ~ 15.0 | 90.5 ~ 92.5 | |||
| Z-300 | 24.0 ~ 30.0 | 98.0 ~ 99.0 | |||
| Z-320 | 19.0 ~ 24.0 | 92.0 ~ 94.0 | |||
| Z-410 | 43.5 ~ 58.5 | 97.5 ~ 98.5 | |||
| WR-12 |
4.5 ~ 6.0 | 92.0 ~ 95.0 | |||
| WR-14 | 6.0 ~ 7.5 | 90.5 ~ 93.0 | |||
| Cationic PVOH Viscosity |
GOHSEFIMER | ||||
| K-210 | 18.0 ~ 22.0 | 85.5 ~ 88.0 | Purpose-developed product, made to order |
Ink jet recording paper Textile sizing agent Emulsifier for Vinyl acetate Cation-endowing action for emulsion Drillg fluid control agents |
|
| Anionic PVOH | GOHSERAN | ||||
| L-3266 | 2.3 ~ 2.7 | 86.5 ~ 89.0 | ☆10% solution of water/ ★10% solution of methanol solution |
Thermal recording paper Emulsifying stabilizer (acryl, styrene, EVA emulsification) Adhesive(hot-melt) Drillg fluid control agents |
|
| CKS-50 | 2.5 ~ 3.0 | 99.0 or higher | |||
| L-0302 | 13.0 ~ 17.0 ☆ | 43.5 ~ 49.5 | |||
| L-0301 | 1.6 ~ 2.6 ★ | － | |||
| Anionic PVOH Viscosity |
GOHSENAL | ||||
| T-330H | 27.0 ~ 32.0 | 99.0 or higher | Printing stock, coat paper NCR paper, release paper, high barrier emulsifying stabilizer, adhesive, film Drillg fluid control agents |
||
| T-330 | 27.0 ~ 33.0 | 95.0 ~ 98.0 | |||
| T-350 | 27.0 ~ 33.0 | 93.0 ~ 95.0 | |||
| Low saponifcation PVOH |
GOHSEFIMER | ||||
| LL-02 | 7.0 ~ 10.0 ☆ | 45.0 ~ 51.0 | ☆10% solution of water/ methanol= 1:1 |
Dispersing auxiliary for suspension polymerization of vinyl chloride Adhesive (hot-melt) Binder Anchor coating agent |
|
| L-5407 | 9.0 ~ 13.0 ☆ | 30.0 ~ 38.0 | |||
| L-7514 | 20.0 ~ 28.0 ☆ | 34.0 ~ 41.0 | |||
| Low saponifcation PVOH (Aqueous solution type) |
GOHSEFIMER | ||||
| LW-100 | 500 ~ 2500 ● | 39.0 ~ 46.0 | ●39 ~ 41 % resin component |
Secondary agent for suspension polymerization of vinyl chloride Adhesive (hot-melt) Binder Anchor coating agent |
|
| LW-200 | 500 ~ 2000 ● | 46.0 ~ 53.0 | |||
| High purity PVOH | GOHSENOL EG | ||||
| EG-40 | 40.0 ~ 46.0 | 86.5 ~ 89.0 | Sodium acetate | Raw material, electrical and electronic materials, ceramic binder, biochemical material |
|
| EG-40P | 40.0 ~ 46.0 | 86.5 ~ 89.0 | 0.15 or less | ||
| EG-05 | 4.8 ~ 5.8 | 86.5 ~ 89.0 | |||
| EG-05P | 4.8 ~ 5.8 | 86.5 ~ 89.0 | |||
| NH-17Q | 22.0 ~ 26.0 | 99.7 or higher | 0.12 or less | ||
| Hydrophilic group-modified PVOH | ECOMATY | ||||
| WO-320R | 6.0 ~ 8.0 | 86.5 ~ 89.5 | Ink jet printing Endowment of flexibility and hydrophilicity |
||
| WO-320N | 6.5 ~ 8.5 | 98.5 or higher | |||
| PVOH containing a wide range of additives (mold release agent, defoaming agent, rust preventive agent) |
P-7100 | 25.0 ~ 30.0 | 98.0 ~ 99.0 | Nonion | Chemicals for paper making |
| P-7000 | 27.0 ~ 32.0 | 98.0 ~ 99.0 | Anion |
The viscosity was measured with 4% aqueous solution kept at 20 degree C with a Hoeppler viscometer.
